| Brand Name: | Jiucan Metal |
| Model Number: | C41-41-25S |
| MOQ: | 500 Pieces |
| Price: | USD 5.8-9.5 / Piece |
| Payment Terms: | T/T,L/C at sight |
| Supply Ability: | 3000 Tons per Month |
This 41×41mm slotted strut channel is produced on a continuous cold roll forming line from Q235B / Q195 carbon steel strip. Because the profile is roll formed rather than welded or bent, the channel keeps a straight axis over the full 3m or 6m length, the open face stays flat and square, and the lips close evenly. Every batch is checked on a granite plate for twist, camber and slot pitch before hot dip galvanizing.
The finished channel is hot dip galvanized to a zinc layer of 40-65µm. Coils are degreased, pickled and fluxed before dipping, so the zinc bonds on the web, the lips, the slot edges and the inner corners alike — there are no bare patches or skipped areas on cut ends and punched holes. That uniform coverage is what keeps the profile rust free on outdoor solar racks, coastal sites and humid plant rooms.
![]()
| Item | Specification |
|---|---|
| Profile | 41×41mm C channel, inward lips |
| Material | Q235B / Q355B carbon steel |
| Wall thickness | 1.5mm, 2.0mm, 2.5mm (custom on request) |
| Forming | Continuous cold roll forming, no welding |
| Surface | Hot dip galvanized, zinc 40-65µm |
| Standard length | 3m / 6m, cut to order |
| Slot | 14×28mm at 50mm pitch, or plain channel |
| Tolerance | ±3% |
Cold roll forming, punching, cutting and galvanizing all run inside our own plant, so a change of length, wall thickness, slot size or hole spacing does not need a second supplier. Send a drawing and we set the roll and punch tooling for the run: custom lengths from 300mm to 12m, thickness from 1.5mm to 3.0mm, oval, round or square holes, welded base plates, and pre-assembled bracket sets.
Our mill sits in Hebei, roughly two hours by truck from Tianjin Port, one of the busiest general cargo ports in north China. Stock sizes leave the yard in 7–10 days; custom runs in 15–25 days. We book space directly with the carrier, load bundled channel on steel pallets strapped with steel bands, and hand you the loading photos plus the container plan before the vessel sails.
Solar mounting rails, seismic bracing frames, HVAC and duct supports, cable tray trapezes, pipe bridges, equipment skids, mezzanine framing and modular partition grids.
Tell us the profile, wall thickness, length, hole drawing and target market, and we quote the exact tonnage and the shipping schedule in one reply. Samples of 300mm cut lengths are available; freight is on the buyer side.