products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Unistrut Fastener
Created with Pixso.

Outdoor Heavy Duty Galvanized Studding 3/4in UNC Rolled Thread Hanger Rod for Pipe Rack Framing Support

Outdoor Heavy Duty Galvanized Studding 3/4in UNC Rolled Thread Hanger Rod for Pipe Rack Framing Support

Brand Name: Jiucan Metal
Model Number: HDG-TR-UNC
MOQ: 1000 Meters
Price: USD 1.10-3.00 / Meter
Payment Terms: T/T,L/C at sight
Supply Ability: 1500 Tons per Month
Detail Information
Place of Origin:
Hebei, China
Certification:
ISO 9001:2015
Product Type:
Heavy Duty Full Thread Rod
Thread Standard:
UNC, ANSI B1.1, Class 2A
Imperial Sizes:
3/8-16, 1/2-13, 5/8-11, 3/4-10, 1-8 UNC
Steel Grade:
Q195 / Q235, Class 4.8, Class 8.8 On Request
Thread Process:
Rolled Full Length, Complete Form, Even Pitch
Tolerance:
±3%
Surface Treatment:
Hot Dip Galvanized
Zinc Coating:
40-85um, ASTM A153 Practice
Length:
1m / 2m / 3m, Custom Up To 6m
Matching Profile:
41x41mm And 41x82mm Strut Channel With Spring Nuts
Loading Port:
Tianjin Port, China
Packaging Details:
Bundles of 50-100 pieces steel strapped with end caps, pallet or wooden case
Highlight:

Outdoor Galvanized Hanger Studding

,

Rust Proof Rolled Thread Rod

,

Pipe Rack One Stop Supply

Product Description
Outdoor Heavy Duty Galvanized Studding 3/4in UNC Rolled Thread Hanger Rod for Pipe Rack Framing Support

Outdoor Galvanized Hanger Studding, Imperial Sizes

Heavy duty studding for outdoor and wet service. The bar starts as Q195 / Q235 round steel, the thread is rolled full length in imperial (UNC) sizes up to 1 inch, and the finished rod is then hot dip galvanized to ASTM A153 practice, giving 40–85µm of zinc on the shank, the thread crests and both cut ends. Where electroplating washes thin on sharp thread edges, the dip leaves a continuous jacket, so a rod hanging under a canopy or along a coastal pipe rack keeps its section for years.

Because the zinc layer is thicker, we roll and then gauge each lot with a go / no go ring gauge after dipping, and nuts are matched to the same lot so the assembly spins on site without re-tapping. Thread pitch is controlled through the rolling die, not by cutting, so every thread is fully formed and evenly spaced along the length — no flat crests, no half threads at the ends.

Outdoor Heavy Duty Galvanized Studding 3/4in UNC Rolled Thread Hanger Rod for Pipe Rack Framing Support

Why hot dip galvanizing earns its cost outdoors

  • Thick sacrificial coating: 40–85µm zinc, roughly five to seven times the protection of a thin electroplated layer.
  • Covers every edge: the metallurgical zinc iron layer seals thread crests, cut ends and shear marks, the places where rust normally starts.
  • Long service in harsh air: suitable for coastal sites, tunnels, car parks, cooling towers and chemical plant pipe racks.
  • Low maintenance: no repainting cycle, and the coating keeps working even when scratched, because the zinc protects the steel galvanically.

Thread accuracy on every rod

  1. Rolled full length, so the thread form is complete with no torn or missing crests.
  2. Pitch checked through the die and verified on sample, kept even over the whole bar.
  3. Post galvanizing go / no go ring gauge test, so the fit stays class 2A after coating.
  4. Nuts supplied from the same production lot to guarantee they run on first time.

Imperial size range

Size (inch) Thread (UNC) Approx. Dia. Typical Use
3/8" 3/8-16 UNC 9.53mm Cable tray hanger
1/2" 1/2-13 UNC 12.70mm Pipe support, duct drop
5/8" 5/8-11 UNC 15.88mm Sprinkler trapeze
3/4" 3/4-10 UNC 19.05mm Heavy pipe rack
1" 1-8 UNC 25.40mm Structural tie, plant rack
Steel grade Q195 / Q235, class 4.8; class 8.8 on request
Coating Hot dip galvanized 40–85µm to ASTM A153 practice
Tolerance ±3%

One stop with your channel order

The rod is made to run in the same system as our 41×41mm and 41×82mm strut channel and our spring nuts: pass the rod through the channel slot, seat a spring nut, tighten, and the hanger is done with no welding and no drilling. Buying channel, fittings and rods together means a single specification sheet, a single inspection report, one container and one loading date at Tianjin Port, instead of three suppliers to chase.

Where it goes

Outdoor pipe racks, coastal cable tray support, sprinkler and fire main suspension, cooling tower frames, car park services, tunnel services and industrial plant hangers.

Packing and lead time

Bundles of 50 or 100 pieces, steel strapped with end caps, on pallets or in wooden cases for export. Stock diameters ship in 3–7 days, made to order lengths and diameters in 15–20 working days. Loading photographs and the container plan are sent before the vessel departs.