products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Solar Mounting Bracket
Created with Pixso.

Pre-Galvanized 41x41mm Slotted Solar Mounting Bracket Photovoltaic Panel Strut Channel 2.5mm Wall

Pre-Galvanized 41x41mm Slotted Solar Mounting Bracket Photovoltaic Panel Strut Channel 2.5mm Wall

Brand Name: OEM
Model Number: SL-4141-PG-25
MOQ: 500 pcs
Price: USD 1.2 - 7 / pc
Payment Terms: T/T,L/C at sight,Western Union
Supply Ability: 25000 Meters per Month
Detail Information
Place of Origin:
Tianjin, China
Certification:
ISO 9001:2015, CE, SGS Test Report
Channel Size:
41 X 41 Mm
Thickness:
0.8-2.5 Mm
Surface Treatment:
Pre-Galvanized (Zinc Coated Coil)
Zinc Coating:
Z275
Coating Standard:
ASTM A653 / EN 10346
Slot Size:
14 X 28 Mm Or Customized
Slot Pitch:
50 Mm
Steel Grade:
Q235
Length Options:
3 M, 6 M, Custom Cut
Load Capacity:
Up To 10 KN Per Span
Application:
Rooftop And Ground Mount PV Rails, Cable Support Frames
Packaging Details:
Bundles of 50 pieces wrapped in waterproof film and steel strapping, export container loading
Highlight:

Pre-Galvanized Z275 Zinc Surface

,

41x41 Slotted Channel 2.5mm Wall

,

Bolted Solar Rail Quick Assembly

Product Description

41x41mm Pre-Galvanized Solar Mounting Bracket / Photovoltaic Strut Channel

Pre-Galvanized 41x41mm Slotted Solar Mounting Bracket Photovoltaic Panel Strut Channel 2.5mm Wall

This 41x41mm strut channel profile is engineered as a structural rail for photovoltaic mounting systems. Cold-rolled from Q235B steel with 2.5mm wall thickness, it carries solar panel loads across ground-mount, rooftop and carport arrays while staying compatible with standard unistrut-style fittings, spring nuts and end clamps.

Surface Treatment

  • Pre-Galvanized: Z275 zinc coated coil with a 20 micron layer, produced to ASTM A653 and EN 10346
  • Uniform coating on inner channel faces and slot edges, not only the outer skin
  • Salt spray tested for long service life in coastal and high-humidity sitesPre-Galvanized 41x41mm Slotted Solar Mounting Bracket Photovoltaic Panel Strut Channel 2.5mm Wall

Slot Geometry

  • 14 x 28 mm slotted holes punched on 50 mm pitch, plus plain and back-to-back variants
  • Slot edges deburred to protect cable insulation and PPE during install
  • Compatible with M10 and M12 spring nuts, hex bolts and channel nuts

Mechanical Performance

  • Point load capacity up to 10 kN per span with standard two-bolt fixing
  • Straightness and twist controlled so rails stay aligned over 6 m runs
  • Cut-to-length service available for project-specific rail schedules

Typical Applications

  • Ground-mount and rooftop solar array rails and cross beams
  • Solar carport and canopy framing
  • Panel support structures, cable tray and equipment mounting
  • General metal framing where hot dip or pre-galvanized finish is required

Quality Control

  • ISO 9001:2015 managed production with mill test certificates per lot
  • Zinc coating thickness checked by magnetic gauge on every batch
  • Third-party inspection (SGS / BV) available on request

Why Choose Pre-Galvanized

Pre-galvanized steel gives a clean, bright finish at a lower cost than hot dip, with no post-weld coating delay. It suits indoor and sheltered rooftop arrays where a lighter, cost-efficient rail is preferred, and it can be touch-up coated on site for cut edges.

Ordering

Standard stock lengths are 3 m and 6 m; custom lengths, pre-assembled kits and project packaging are available. Send your rail schedule and target market standard for a same-day quotation.

Ratings & Review

Overall Rating

5.0
Based on 50 reviews for this supplier

Rating Snapshot

The following is the distribution of all ratings
5 stars
100%
4 stars
0%
3 stars
0%
2 stars
0%
1 stars
0%

All Reviews

J
Jacob Blake
United States Nov 19.2025
Quantity also meet my expectations
H
H*m
Iraq Apr 22.2025
Good
R
RASHID GORAN
Iraq Dec 4.2024
Good